Category Archives: Futurism

Sorry Nerds, There’s No Warp Drive


It makes for a sensational headline but NASA didn’t even come close to discovering warp technology.

The mechanism behind their fuel-free propulsion has no clear link to warping space-time. In fact, space-time is not proven or understood to exist as a material substance able to warp. It’s all nonsense. So what really happened?

Richard Feynman once said: “The first principle is that you must not fool yourself – and you are the easiest person to fool.”

You should have been suspicious when the story made the rounds on social media. The headlines were claiming NASA successfully tested something called the EM Drive. The EM drive is awesome, and it’s real science. It’s a propulsion engine doesn’t use propellant, which seems to violate the laws of physics by creating a reaction with no initial action.

First, let’s examine the actual finding. NASA has developed a hollow device that can be  pumped full of electromagnetic radiation which reflects back-and-forth, tapped inside the chamber, generates thrust, causing the device to accelerate in a direction based onthe shape of the chamber. You might ahve seen the story or similar reports over the last year because iterations of it have been built by Roger Shawyer (the EM Drive), one from a Chinese group led by Juan Yang, and one from Guido Fetta (the Cannae Drive), all claiming successful thrust. The stories on science news sites claim the acceleration created is caused by warped space of an Alcubierre Drive, the completely fictional “Star Trek” design.

Here are some problems. First off, none of the tests showed results from gadations in power. If this is a viable prototype for an engine, the science behind it hasn’t proven why a tiny acceleration in relation to a huge amount of relative power is worth any sort of real consideration for space travel. It’s a weak engine with no sign of how it can be scaled.

Secondly, the thrust they created is so small it might just be a mistake in mathematics or caused by an unknown factor, unrelated to warp tech. A true test requires an isolated environment, with atmospheric, gravitational and electromagnetic effects removed from the equation.

Thirdly, good science is reproducible. These tests lack a transparent design so no one else can verify that this actually works.
Finally, a real report has to be created that can be peer-reviewed and understood before irresponsibly publishing the claims.

Optimism of this sort, claiming to be able to put people on mars with a warp engine, is not scientifically valid. This latest group declared they have broken the previously-held laws of physics. They assume we can scale up and implement this engine for space propulsion just because of some questionably positive results. They claim to be distorting space, they claim they might be causing light to go faster by approximately 10^-18 m/s. They made these claims without actually proving them, and told the general public, spreading misinfo.

Harold “Sonny” White at NASA, has made extraordinary claims about warp drive in the past. He is totally the kind of guy who would jump to warp drive as a conclusion. There is nothing in NASA’s report that shows they’ve created a warp drive. Sorry, Star Trek and Star Wars fans. Most likely this is a public relations move to get America and the world science communities more excited about space travel and science education.

Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY

How Bacteria May Be Our Allies in the War on Climate Change


A recent report from the United Nations has revealed some unsettling figures, warning that our planet could experience a 40 percent shortage of usable water by the year 2030 unless countries begin to substantially cut back on its usage. Because 70 percent of fresh water in the world is used on irrigation and agriculture, the most practical approach would be to change the ways in which people farm. The need is a rather ubiquitous one. Throughout California’s Central Valley, farmers have begun drilling for water, and they are now tapping into stores that are over 30,000 years old. Kenya is now being faced with its worst drought since 2000, and farmers have begun hand-digging wells in order to gain hold on the receding water table, meanwhile, it’s estimated that as many as one-in-ten Kenyans are going hungry.

This might seem to be as much that both of these regions have in common, but that means that a game-changing solution could easily be put into place in both economies, making use of a resource we hardly knew was there. Beneath the soil, surrounding the roots of plants are swarms of helpful bacteria that number in the billions. These microbiomes can be found in soil all across the globe: along the hard-hit Kenyan coast, right to New England’s notoriously rocky soil.

In each shovelful of dirt, there are armies of bacteria, along with microscopic fungi and protozoan, all of which carry out life processes that the soil is dependent upon for yielding crops, but bacteria substantially outnumber the other microorganisms. Even in bygone centuries, bacteria effectively provided us with a number of products – from cheeses, wines, and vinegars, to laundry detergents and even medicine. Now, it could seem that aside from a food source, they could be helpful allies in actually the growth of standard produce. Actinomyocytes – which are just one type of the diverse microscopic ecosystem found in the dirt, have been used to synthesize a number of modern day antibiotics, such as erythromycin, used to treat bronchitis and whooping cough, among many other infections.

Another type of bacteria known as pseudomonas, is able to metabolize a number of chemicals and fertilizers into useful nutrients for the soil, while clostridium is able to thrive despite an absence of oxygen, breathing anaerobically from the soil’s nitrogen supply as it feeds the plants their nutrients. Not only does this trait make it important, but it’s also an important sign that the bacteria, with their incredibly short lifespans, are among the few organisms that can adapt quickly to an ever changing climate. Manipulating them to our advantage could be a primary means of our species’ own survival.

At the time of this writing, there are scientists throughout the five continents that are regularly digging up evidence for the beneficial symbiotic relationships that exist among microbes and crops such as corn, cotton, tomato and peppers, even varieties that have been genetically modified. Plants typically give off a liquids rich in carbon, providing sustenance for the microbes. Some of these liquids are the result of the plants responding to environmental stressors such as attacks from insects, another rising concern as we are seeing an increase in invasive insect species. Other chemicals are produced due to increases in water following a deluge. The soil bacteria are sensitive to these chemical messages, and they then secrete chemicals of their own which can strengthen the already complex defenses of the plants.

As an example, there are studies done that have shown the right combination of beneficial microbes exposed to the seeds directly can be as effective as commercial pesticides against one particular type of worm known as the rice leaf-folder, which will wraps itself inside and then eat away the leaves of younger plants. Other studies have demonstrated that there are soil microbes that will significantly increase the overall growth and yields of important crops. One study from Germany, observed the same field over a 10-year period, learning that beneficial microbes have increased the rate of growth in maize plants but also boosted the prevalence of phosphorous as well as other elements that are critical to the growth of crops in the soil. In Colombia, where the effects of famine due to climate change are already being experienced, microbiologists have begun to mass-produce bacteria to colonize cassava plants, an economic staple. The result was an increase in the yields of cassava by 20 percent.

There are a number of farmers across the globe who strive to adapt to climate change, a sensitive issue as many established farms, both family and commercial, were plotted based on their precise ability for growing crops. As warming trends advance, dry areas are projected to become drier, and wet areas wetter. Those who have been hit hardest are small-scale farmers who grow their own crops with limited resources. A simple increase in their yield may benefit them economically as boosted crop sales generate cash and higher yields also allow them room to grow other crops. A study conducted using GMO cotton in India over a ten year period, ending in 2013, showed improved nutrition in the diets of subsistence farmers who grew the cotton for this reason – that they could grow more vegetables for themselves, while those who continued growing standard crops ate a diet primarily consisting of cereal. Additional revenue from the crops may then be invested in a wide array of “climate-smart” farming efforts geared towards the further conservation of water and soil.

There’s more good news, however, as to how these microbes may help guard against droughts. Some new studies have shown that microbes have a direct role to play in helping soil bacteria shield crops from harsh dry seasons while also improving their growth and ability to absorb nutrients from rapidly drying soil. If the crops are beneficial to the bacteria, they may help them adapt to extreme highs and lows as well as massive flooding events.

In one such study, the scientists observed that pepper plants cultivated within arid desert-like conditions can function as “resource islands” wherein they attract and manage to trap in any bacteria that sustain plant development during the periods when water is scarce. At present, we know that our bodies are dependent in many ways on microbes as well, which aid in processes like digestion, and may even control traits that we once attributed to genetics, such as body weight. Perhaps, this relationship with plants is not all that different. There was another study which identified soil bacteria that can actually signal the plants to temporarily open and shut the water absorbing pores on their leaves. Not only does this guard against fungi and other bacteria that may cause disease, but it can also keep the moisture trapped inside the plant.

So what’s the best way to go about cultivating this new biotechnology? Particularly at a time when many people believe GMO’s themselves to be harmful.

As we speak, companies involved in the production of foods and medicine, such as Nozozymes, Monsanto and Bayer Crop Sciences, are already launching their own investigation in to how we may go about the commercialization of soil bacteria. In their stead, are also several start-up companies that work tirelessly around the clock in order to commercialize microbial cocktails for growing food, but in all, we are only at the dawn of what may be an exciting new era of realizing the full potential that microbes have to offer.

The United Nations has officially designated 2015 as its International Year of Soil, part of a systematic plan to focus on not only climate change, but one of the problems it brings along with it – the issue of world hunger. Therefore, governments, funders and researchers of all stripes have been taking a serious look into the function of healthy soil in helping the United Nations reach its goal of achieving food security, while the population continues to climb past the seven billion mark, and the prolonged droughts of climate change continue to lower the yields of important food crops. While these initiatives often do a good job looking at the big picture, considering the potential that crop surpluses will have on communities and farmers, one thing that is so often overlooked is hidden in the soil itself, many species of which have evolved over the last six thousand years with their crops, part of a functioning ecosystem in which the crops themselves are essential to the life processes of the soil microbes.

At the end of the day, however, the use of soil microbes for producing better harvests may just be a single phase out of a trying and complex journey as we continue to improve the quality of our food. Even maintaining the quality of the natural resources may be a continuous battle, with climate change expected to worsen by the mid-21st century. Already there are efforts underway to cultivate new GMO’s capable of thriving in drier climates, extracted from beans.

As the climate is changing and unnatural changes like a continuous increase of CO2 continues to build up, risking the destruction of countless natural sanctuaries such as the Amazon River basin, now one of the most important climate sinks on the map, perhaps our best hope in offsetting the impending devastation may lie within nature itself – harvesting what the Earth already offers, in order to preserve our planet for the future.

James Sullivan
James Sullivan is the assistant editor of Brain World Magazine and a contributor to Truth Is Cool and OMNI Reboot. He can usually be found on TVTropes or RationalWiki when not exploiting life and science stories for another blog article.

Spider Silk Continues to Inspire Biotech Advancement


From folklore to children’s stories, it seems humans have always been fasterrificcinated with spider silk, the diverse material produced in abundance, at will from the body of nearly all species of spider. Studying the biomechanics of the spinnerets and the chemicals that combine to produce various textures of silk at a molecular level has allowed scientists a new perspective on efficiency and biosynthesis.

The golden orb-weaver spider (Nephila clavipes) produces so much silk everyday it has become the most studied spider in the world, and was even included in a trip to the International Space Station in a special terrarium. Golden Orb-Weaver silk is 30 times thinner than your average human hair. If Spider-man were to produce a proportionate thickness of the same material the line would likely hold, maybe even hold the weight of two adult humans(Valigra, 1999.)

Spider-manIt’s hard to find a material as strong while still retaining the flexibility and elasticity of spider silk. Maybe impossible. The dragline of the average spider silk is five times more durable than the Kevlar used in bullet-proof vests(Benyus, 2002, p. 132), plus, it’s lighter and breathes better. Kevlar is a petroleum product and requires pressurized vats of intensely hot sulfuric acid (Benyus, 2002, p.135; 2001). Biologically-inspired materials might be drastically more efficient on energy costs to create. Oil-based synthetic molecules often create dangerous bi-products which are hazardous to handle, expensive to store and virtually impossible to dispose. Spiders create superior materials with a very small amount of energy, heat or byproducts. (Benyus, 2001). NASA studies found that Gold Orb Spider spinneret systems can be so efficient they include reusing spider silk eaten and ingested after use.

silk

Electron-microscope imaging shows the variety of textures a single spider can produce from its body.

Spider silk would be so incredibly useful it might not even be possible to anticipate the range of products it might inspire. Most materials knows to man are either elastic or have a high tensile strength but some  pider silks fall in a  rare category of scoring high in both areas (Benyus, 2001). Spider silk can stretch 40 percent longer than its relaxed state without losing any of it’s shape when it returns. Even the stretchiest nylon can’t perform that way (Benyus, 2002, p.132; 2001). Dupont materials compared silk to current steel cables used on bridges and standing structures worldwide and found dragline spider silk strong enough to be used as the quick-stop brake system on a jet in flight on an aircraft carrier (Valigra, 1999), at a fourth of the thickness of steel cables.

“spider silk is so strong and resilient that on the human scale, a web resembling a fishing net could catch a passenger plane in flight. If you test our strongest steel wire against comparable diameter silk they would have a similar breaking point. But if confronted with multiple pressures, such as gale-force winds, the silk can stretch as well; something steel cannot do” (Benyus, 2001, 2002).

Spiders evolved the ability to spin a web strong and versatile enough to  allow it to run across, pull and twist into position and manipulate with its many legs in order to trap prey, set complicated tricks into action and run along without becoming entangled. The elasticity and strength of the web are partly why it is so easy for another species to become ensnared. Researchers who have taken the time to examine closely have realized in awe the potential for application in spaceflight, industrial, commercial and even fashion industries.

Spider silk also shows incredible tolerance for colder temperatures without becoming brittle or falling apart. Spiders are able to hide underground or near the warm trunk of a tree and return to their outdoor webs later to repair and rebuild what is largely left intact. These cold-tolerant properties lend superior promise to its potential as aan advanced suitable for bridge cables, as well as lightweight parachute lines for outdoor climbing in military and camping equipment. Scientists have been hyping up its many bumberpotential medical applications such as  sutures and replacement ligaments (Benyus, 2001) and as a durable substance to fabricate clothing and shoes (made of “natural fibers”) and synthetic moldable solid material that can create rust-free panels and hyper durable car bumpers. (Lipkin, R., 1996).

“if we want to manufacture something that’s at least as good as spider silk, we have to duplicate the processing regime that spiders use” Christopher Viney, early biomimetic proponent (Benyus, 2002, pp. 135-6).

Take a look at the fascinating process as a spider creates silk and you will find something that more closely resembles human technology than animal biology. Spiders have evolved to create something highly specialized without tools or any sort of special diet requirements to fuel autosynthesis of silk.  Spider silk is formed out of liquid proteins within the spider’s abdomen. Several complex chemicals in a cocktail travel through the duct of a narrow gland. The substance is squeezed out in a very controlled manner through any combination of six nozzles called spinnerets. the protein collected from eating insects and various vegetable matters “emerges an insoluble, nearly waterproof, highly ordered fiber” (Benyus 2001).

Most spiders can produce a few different types of of silks. They can make threads that can be used to build structures, a strong dragline, or an elastic cable for repelling and reusing while creating the foundation for a web.  They can make a sticky, wet line that clings to itself and most other surfaces for fastening strong structures, making cocoons and trapping prey. There is much to be learned because all of human scientific knowledge on the subject still comes from a handful of studies of only fifteen or more spiders to date. There are 40,000 spider species, most of which we know almost nothing about. There might be even better silk from some species.

“But yes there is probably a tougher, stronger, stiffer fiber being produced right this minute by a spider we know nothing about. A spider whose habitat may be going up in smoke” Viney (Benyus, 2002, pp.138-40).

Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY

biomimicry and the search for new tech


Biomimicry is the study of nature as inspiration for human designs in effort to fit  human technology into a more efficient and workable, sustainable model. Each organism alive today has the potential to teach humankind about the systems and rules it follows. Natural solutions aren’t just about having better materials.

They are about making products that might empower mankind against dwindling resources. Ecosystems aren’t just where we all live and consume resources but they are a resource of information as well. The ecosystem is self-replenishing and efficient and can be channeled and worked with in a way that has yet to be attempted. Potential new materials come with  side effects that warrant equal consideration. Biomimicry is a paradigm that fits many emerging techs. Take a look at spider venom’s effect on the drug industry, for example:

A peptide found in spider venom might lead to a safer class of painkillers. What other drugs, chemicals and designs are being inspired by biology and newly-studied species?

Biomimicry is a relatively young term, describing designs that derive inspiration by emulation of designs found in nature. The movement is focused on sustainable human endeavors and projects that will compliment the environment humans share with the rest of the natural world and thus better humanity’s chance for survival. Check out this video, the most recent by Janine Benyus, one of the idea’s most vocal proponents.

You might wonder why these chemicals are found in nature at all? There are many functions and motivations behind the diverse, unfound substances found in the Eco-system. Plants develop poison to discourage predators. some develop drugs to encourage other species to assist with seed dispersal. Evolution has provided the earth with highly diversified species of plants fungi and animals the vast majority of which have yet to be explored.

French researchers discovered a painkiller as powerful as morphine in the venom of e infamous African black mamba snake. Then there is a potential psoriasis treatment derived from the venom of the Caribbean sun anemone, undergoing testing in the U.S. might help sufferers with psoriasis, autoimmune disorders, multiple sclerosis and rheumatoid arthritis.gecko

Textures and surface patterns of geckos have been studied for stickiness. Skin textures of some animals have been proven to possess antimicrobial properties, in that bacterial colonies can’t find a way to attach to surfaces, making water currents and frequent rinsing enough to eliminate infective agents.

Artificial limb design and development has been greatly advanced by designs mimicking the weight-bearing capacity of other animals. New technologies are being developed to grant disabled people the ability to feel touch, as the natural mechanisms controlling pain, touch and movement are further understood.

 

In recent biomimetic news, we may see a mastery of understanding the human eye lead to a leap in ocular and immersive tech. MHOX is an Italian design firm who would like  synthetic replacement eyes.EYE to become an affordable, regular upgrade people opt for. Their work could restore sight to the blind and be the missing link to allow locative tech and a lot of web 2.0 concepts to become workable mainstream realities.

There is an initial shock in some people when these concepts are explained. Something about the current trends over the last few decades favoring straight, clean lines that are inspired by lifeless geometry over bio-inspired,  flowing shapes.

The drugs and prosthetics discussed, theorized and predicted in the biomimetics industries doesn’t have to turn humans into cyborgs, although some proponents wouldn’t be against that. It is likely that the public will be more inclined to accept these advancements as they are developed. Decades back people might have been less receptive to plastic hip replacements and artificial hearts, but the medical community has become very good at installing these prosthetics as minimally invasive, outpatient procedures.

 

Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY

The future of Auto Theft


We live in a time where auto theft is incredibly impractical. Criminals in 2015 struggle to figure out how to get past electronic security and alarm systems,  reflecting an over 90% drop in NYC auto theft since the early 90’s. These days, even a successfully stolen vehicle can be recovered with GPS tracking and incidences of theft are often caught on video.

It might seem like convenience is weakness but since car theft is way down,  this might not hold true at the moment. The security holes that seem most vulnerable to exploitation revolve around a key fob. Fobs are those small black electronic keys that everyone uses to unlock their car these days.  They work by using A pre-determined electronic signal that must be authenticated by the CAN system. If the authentication checks out, the doors unlock. In newer cars, the engine will start via push button if the fob is in the immediate vicinity of the car so the driver doesn’t have to fish them out of her pocket.

Etymology of the word fob:  Written evidence of the word's usage has been traced to 1888. Almost no one uses a pocket watch these days but a fob was originally an ornament attached to a pocket watch chain. The word hung around as an ocassional, outdated way to refer to key chains. In the 80's, the consumer market was introduced to devices that allowed a car to be unlocked or started remotely. The small electronic device was easily attached to the conventional set of carkeys, and within a few years the term fob key was generally used to describe any electronic key entry system that stored a code in a device, including hotel keycards as well as the remote car unlocking device usually described by the word.
Let’s take a look at three ways a fob key can be hacked.

Recording FOB signals for replay. This is one of those urban legends that’s been around since at least 2008. The story goes: thieves record the key fob signal and can later replay it with a dummy fob. The car can’t tell the difference and unlocks/starts as if the correct key fob has been used. It’s easy for the thief to control the schedule and catch the victim unawares because it doesn’t have to interact with the fob in real time. Sounds like the most effective way to hack a key fob, right? Problem is, each signal is unique, created with an algorithm than includes time. If the devices are not synchronized the fob can’t open the lock. A recorded signal played back wouldn’t open the lock. The conventional wisdom is that the devices, proprietary knowledge and experience needed to make this method work are not worth a stolen car’s worth of risk. Secrets leak but honestly, a team organized enough to steal a car this way would be able to use the same skills to make a lot more money legally. Lastly, if you could reverse engineer and record fob signals the FBI would already be watching you. The demographic that used to steal cars in the 90’s were largely  not like the fast and furious franchise.  The idea that a huge tech security op could be thwarted isn’t necessarily far fetched but there are no recorded cases. Not one. For that to change, someone needs to figure out how the sync code is incorporated into the algorithm and apparently no one has.

Amplifying FOB signal to trigger auto unlock feature. Not only is this method genius but it is rumored to be already in use. Eyewitnesses claim to have seen this in use and it sparked theories about the methodology. Unlike recording a signal, amplification is a lot cheaper and requires almost no proprietary knowledge of the code to pull off. It works like this: A device picks up a range of frequencies that the key fob is giving off and increases the range. Some cars feature the ability to sense the authentic key fob in a five foot range and auto-unlock or autostart their ignitions. With a signal amp, the engine can theoretically be started if the real key fob is within 30 feet. So, the keys can be on your nightstand but the car thinks you are at the car door. The thief can then open the door, sit in the drivers seat and the ignition can be pushbutton triggered as if the key fob was in the car with the thief. I thought about repeating some of the anecdotes I found online about this method but none of them are confirmed. No one has tested it but it looks like a signal booster can be bought online for pretty cheap if you know what to buy($17 – $300). Last week, NYT ran a piece about signal boosting. You can read that here.

Random signal generator. So unique frequency codes means you can’t record  the signal and reuse it without a proprietary algorithm but signal amplification might not work on some systems in the near future. The rumors of it working successfully already have car companies working on a sensitive enough receiver that it would be sensitive to distortion and interference caused by the amp. But there are exceptions, where the signal is not random, such as a service codes. Manufacturers have overriding unlock codes and reset devices to assist with lost key fobs and maintenance/emergency cases. When these codes are leaked, they often open up a brief but large hole in security, during which thousands of cars can be swiped. The main reason it isn’t happening already is more about organized crime not being organized enough to plan and exploit that security hole. Or, you know, maybe the codes just haven’t leaked yet.

Hardware construction.

hackrfConstructing the hardware components needed takes specialized knowledge of hardware. Searching for information about this stuff if bound to attract NSA attention when followed by parts being ordered. The kind of guy who likes to sit in a workshop ordering parts and tinkering all day isn’t always the one who wants to go out and take risks with newer, higher-end cars. That is the kind of multifaceted thief NYC was famous for back before the numbers plunged in the 90’s but the hardware is becoming more and more esoteric. People are not as apt to work on devices that have such small parts on projects that run with such high risk. For that reason, there is more money to be made in producing a bunch of low-cost black market devices that are already calibrated and tested to work. Buying this device on the street and using it before selling it off again might leave a smaller trail than building it in a sketchy apartment-turned-lab that is sure to be searched if a heist goes wrong.

Paper trail & identity theft.

Technology has made it really difficult to even take the car int he first place but once you have a stolen car they are almost impossible to get rid of these days. There can be multiple tracking devices and serial number locations in one car and if the operation isn’t extremely current, the likelihood of the car being found in red hands goes up quickly.

Once the car is stolen, a tech-savvy thief would need special equipment to access the on-board computer and do things like disable the GPS system, take any additional tracking system offline, and disable tech support from manipulating the vehicle’s electronics. Equipment to hack the car’s CAN system has been expensive and shrouded in mystery for the last couple decades but in recent days the internet has united hackers and security researchers to create custom hardware like CANtact Device Lets you Hack a Car’s CPU for $60. 

 

Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY

Why is it so difficult to think in Higher Dimensions?


Humans can only perceive three dimensional space but theoretical math works out just fine when manipulating objects in four or more spacial dimensions. Mathematicians, scientists and philosophers still debate whether higher spacial dimensions actually exist.

It’s hard to imagine higher dimensions. Even one additional spatial dimension is hard to see with your inner mind’s eye. If you want to imagine six, seven or eight spacial dimensions it isn’t just hard – no one’s even truly conceptualized hyperspace. It’s what makes the subject compelling but also what makes it frustrating to talk about. The examples theorists are able to use to help people “visualize” what can’t be seen must work within human limitations, and are thus second and third dimensional examples of a higher dimensional concept or object.

“Wait a second,” some of you are wondering, “Isn’t TIME the fourth dimension?”
This article is about spacial dimensions only. Personally, I agree with Amrit Sorli and Davide Fiscaletti’s work which I feel adequately proves that time is NOT a spacial dimension. If you want to debate this issue further, you can read my reasoning in my follow up piece, Time: fourth dimension or nah?, also available on Cosmoso.net

One of the most basic exercises in multidimensional theory is to imagine moving in a fourth. The distance between you and everything around you stays the same but in some fourth dimension you are moving. Most people can’t truly do this imagination game because there in nothing in our three spacial dimensions to compare the experience to.

Flatland_sphereFlatland

In the famous book about spacial dimensions, Flatland, living, two-dimensional beings existed in a universe that was merely two dimensions.  A being with three dimensions, such as a sphere, would appear as a circle able to change circumference as it moved through a third dimension no one in flatland has ever conceptualized.

Humans evolved to notice changes in our three-dimensional environment, inheriting our ancestors ability to conceptualize space in three dimensions as a hardwired trait that actually stops us from conceptualizing other aspects of reality that might nonetheless  exist. Other people see hyperspace as a theoretical construct of mathematics that doesn’t describe anything in reality, pointing to the lack of evidence of other dimensions.

Tesseracts Predate Computer-assisted Modelling.

A Tesseract. Many people in the advanced math classrooms of my generation of high school students struggled to wrap their heads around tesseracts without moving diagrams. If a picture is worth a thousand words are we talking animated gifs and words used to describe three dimensional space or should we make up a new saying?

We are able to conceptualize three dimensions in the abstract when we watch TV, look at a painting, or play a video-game. Anytime we look at a screen we watch a two dimensional image from a point outside that dimension. Having an outside point of view for a three dimensional space could give us a way to artificially understand a higher spatial dimension. Until that time comes, we are sort of stuck explaining fourth dimensions by demonstrating how it would look on a two dimensional screen which we view from a third dimensional viewpoint.

It’s kind of like imagining “one million”; you can prove it mathematically to yourself, you can count to it and you know how valuable it is but you can’t truly picture one million of anything. Trying to explain this conceptualization problem with words is pretty tough because your brain is not equipped to handle it. Humans try to wrap their minds around it and dream up ways to explain hyperspace to each other anyways.

4D Rubix Puzzle

A rubix cube is particularly compelling as a multi-dimensional teaching tool, because it puts spacial dimensions in the abstract in the first place, and then gives the cube the ability to change the dimensional orientation of a third of it’s mass. It’s hard to wrap your head around a normal three dimensional rubix puzzle. By adding another dimension and using the same principle, one can ALMOST imagine that fourth spacial dimension. Most people can’t solve a three dimensional Rubix puzzle but if you think you are ready for the fourth dimension, you can download it and play it on your two dimensional screen, here: Magic Cube 4D

If you don’t think you’re ready to try and solve that puzzle but you want to know more you can watch this roughly 1/2 hour video about it:

Miegakure

While Miegakure is still under development, it’s set for release in 2015. Interactive games like this can spur collaborative thinking from a larger pool of collaborators – and make game developers tons of money.

If you want something a little less abstract than Rubix, check out this prototype for Miegakure, the surreal PlayStation 4 game that lets the user explore a four dimensionally capable world through three dimensional spaces that connect to each other through higher dimensions. It’s a great idea that makes everyone have the initial thought of wondering how the heck they coded it. Then the idea sinks in and you realize they wrote the code first and played with the visual manifestation as they went. It’s a great metaphor for the idea in the first place; begins as a concept rather than an observation. The essence of the argument against hyperspace actually existing is the lack of physical evidence. Unlike a ghost story or a spiritual, religious attempt to explain the supernatural, there is actually mathematical evidence that seems to make higher dimensions possible. It has logical evidence as opposed to empirical data. There are ways to observe without using human senses but it’s difficult to prove an observation of something the majority of humans have trouble even seeing with their mind’s eye, so to speak.

One day we might be able to use technology to increase our understanding of this abstract concept, and manipulate an entirely new kind of media. For now we are stuck with two and three dimensional visual aids and an mental block put in place by aeons of evolution.

 Read More about Hyperspace on Cosmoso.net~!
Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY

Mars isn’t a One Way Trip Anymore


150 Cubic Meters of Ice Means a powerful rocket fuel can be synthesized on Mars – powerful enough to escape Mars gravity for the return trip to Earth.

Turns out Mars has 150 billion cubic-meters worth of ice that’s been frozen for so long it’s covered with Mars’ ubiquitous red soil. NASA knows this because of  radar measurements from the Mars Reconnaissance Orbiter. The ice is spread out among a few ginormous belts made of countless glaciers.

There’s been evidence of a once liquid ocean on Mars’ surface.  Curiosity rover found riverbeds back in September 2012 with NASA able to estimate two pints of water for every cubic-foot of soil. In early 2014, Spanish researchers were able to prove glaciers dug canyons 3.7 billion years ago. Water leaves chemical byproducts of various reactions and residues.

No one expected such a big find, except maybe anyone who saw the Arnold Schwarzenegger version of Total Recall.

If you are wondering where Total Recall got the idea for underground glaciers, scientists  have suspected glacial activity below the Martian surface for decades. The debate centered around formations that would not be abel to hodl their particular shape without glacial activity but was the frozen material water ice, dry ice, or a muddy mix of red dust and water or some other frozen gas or liquid.

 

Using logic and science, the evidence available can now be interpreted to be enough to cover Mars with a meter of liquid water, if it melted – and if Mars was completely smooth.

Glaciers of Mars Image: Mars Digital Image Model, NASA/Nanna Karlsson

 

“We have looked at radar measurements spanning ten years back in time to see how thick the ice is and how it behaves. A glacier is after all a big chunk of ice and it flows and gets a form that tells us something about how soft it is. We then compared this with how glaciers on Earth behave and from that we have been able to make models for the ice flow.”

Read Nanna Bjørnholt Karlsson entire press release on the subject.

Water can easily be separated into hydrogen gas and oxygen, making breathable air and a powerful rocket fuel that can be used for other space missions, including a return trip to Earth. Water can also be used to cultivate food and animal crops on Mars, making colonization a hell of a lot more appealing.

Oh, and one more thing:

Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY

Physics Concepts Intuitively Understood Through Skateboarding


People constantly manipulate technology without formal training but are not always able to explain what they know.

You probably aren’t surprised skateboarders haven’t been using proper physics terms to teach each other sick tricks. Try to wrap your head around Taylor Bray wrapping the board around his front foot while also turning his body around 360 degrees in this short youtube video:

Sometimes it’s almost like only the skater knows what’s going on with the board. As if to prove my point, the title of this video was written by someone who can’t even seem to label the trick. When I was a kid, wrapping the board around your foot like that was called an “impossible”. I originally encountered the clip on facebook with the trick labeled “front foot impossible craze”, making a total of three attempts to describe how Taylor Bray is spinning his body and the skateboard.

Here are some physics concepts Bray obviously understands without having to verbally prove himself:

Leverage. Most flip tricks start with an ollie, leveraging the board up into the air by tapping the end hard against the ground.

Friction. The top of the skateboard has grip tape to increase friction and make it stick to the soft rubber sneakers. The bottom of the skateboard has wheels to make it roll back and forth but not slide as much side to side. This trick doesn’t play to much with sliding friction but tons of tricks play with the various levels of slipperiness and stickiness a skateboard offers.

Potential energy. Bray is popping the board up with an Ollie but there’s also. A newer skateboard deck has “pop” which is basically when the wood is at its most springy. By kicking the board hard against the “ground”(in this case, the ramp), he can make the board bounce up into the air with him when he jumps. The more a skateboard is used it loses its pop.

Gravity. That brief instant where he kicks the end of the board into the ground allows him to jump and escape gravity. An Ollie let’s him bring the board up with him. Gravity always pulls things down at the same rate, making it easy to estimate how much time Bray has to perform the trick. The subsequent slow motion shots of the same trick allow the viewer to analyze the trick but the first version in the clip shows how fast gravity pulls Bray back toward the Earth, giving him about one second to pull off the impossible.

More rolling friction. When he gets the board in the air, he rolls it around his front foot. This trick was called an “impossible” when I was a kid in the 90’s but it’s basically wrapping the board around his front foot using rolling friction.

Inertia. Bray is using inertia in several ways. He is using the speed he has to travel up the ramp against gravity. He’s using the direction the ramp sent him in to help him continue up into the air after the Ollie. Inertia comes into play in a few small ways while he is in the air manipulating the board with his feet. When he finally lands, he continues in the direction he was already going, and it is important that he points the wheels in the approximate direction of that momentum so his inertia doesn’t throw him off balance.

Rotation. Bray is analyzing two different axises in quick succession. First he is rolling the skateboard around that foot in a move where the axis is outside the board itself, then he is catching it with his feet and rotating himself and the board on a vertical axis 360 degrees, landing in the same direction he was facing before the trick began.

In the box above, I stuck to physics concepts. There are additional science concepts at work in this example, such as muscle memory, spatial cognition, coordination, time perception and sense of balance.

A really common technical flip trick is the 360 flip. A 360 flip spins the board on 2 axises at once. In order to perform the move, a skateboarder has to conceptualize the simultaneous rotations before actually kicking them into place, and the rotations are often too complex for a layman to follow.

The next age of enlightenment could require humans to quickly communicate complicated concepts despite only possessing an intuitive understanding.

Consciousness and the human brain is a relatively young field of study. We are starting to understand what is happening in the brain when we perform complex physical tasks like a frontside 360 front foot impossible. Soon we might be able to identify the intuitive understanding of the related physics concepts and allow someone like Bray to access the verbal explanations of these physical principles as freely as he applies them to reality.

I’ll leave Cosmoso.net readers with this thought about language in skateboarding:

In the 90's, a newer, more symmetrical skateboard design allowed for a new school of technical flip tricks. As designs do when they've reached near perfection, the new school skateboard changes within a very narrow parameter based on current trends in skateboarding - the design has plateaued. Skate tricks are a folk art that are learned from advice from peers and pros. The communication about how to pull off a given trick comes in the form of an esoteric language that changes over time. The names for new and developing styles of tech tricks are different in different social circles, evolve and change over time, and seldom utilize proper physics vocabulary. Skateboarding remains a great way to demonstrate intuitively understood, applied physics.

 

Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY

Why is CRISPR the Science Buzzword of Early 2015?


CRISPR isn’t just the cutting edge of genetic modification – it is re-framing our understanding of evolution.

 What is CRISPR?
CRISPR is a DNA sequence that can do something most other genes can’t. It changes based on the experience of the cell it’s written in.  It works because of a natural ability for cells to rewrite their own genetic code, first discovered in 1987. The name CRISPR was coined in 2002, and it stands for “clustered regularly interspaced short palindromic repeats”. They function as a method of inserting recognizable DNA of questionable or dangerous viruses into DNA strands so that the offspring of the cell can recognize what its ancestors have encountered and defeated in the past. By inserting a CRISPR-associated protein into a cell along with a piece of RNA code the cell didn’t write, DNA can be edited.A 2012 breakthrough  involved, in part, the work of Dr. Jennifer A. Doudna. Doudna and the rest of the team at UC Berkley were the first to edit human DNA using CRISPR.  Recently, in March 2015, she warned this new genome-editing technique comes with dangers and ethical quandaries, as new tech often does. Dr. Doudna in a NYT article, she called for a planet-wide moratorium on human DNA editing, to allow humanity time to better understand the complicated subset of issues we all now face.
CRISPR-related tech insn’t only about editing human genes, though. It affects cloning and the reactivation of otherwise extinct species. It isn’t immediately clear what purpose this type of species revival would have without acknowledging the scary, rapidly increasing list of animals that are going extinct because of human activity. Understanding and utilizing species revival could allow humans to undo or reverse some of our environmental wrongs. The technique may be able to revive the long lost wooly mammoth by editing existing elephant DNA to match the mammoth‘s, for instance. Mammoths likely died out due to an inability to adapt to natural climate change which caused lower temperatures in their era, and are a non-politically controversial choice but the implications for future environmentalism are promising.
Each year, mosquitoes are responsible for the largest planetary human death toll. Editing DNA with CRISPR bio-techniques could help control or even wipe out malaria someday. The goal of this controversial tech is to make the mosquito’s immune system susceptible to malaria or make decisions about their breeding based on how susceptible they are to carrying the disease. The controversy around this approach to pest and disease control involves the relatively young research behind Horizontal Gene Transfer, where DNA is passed from one organism to an unrelated species. A gene that interferes with the ability of mosquitoes to reproduce could end up unintentionally cause other organisms to have trouble reproducing. This info is based on the work of , , http://www.biorxiv.org/content/early/2014/12/27/013276
Even more controversial are the startups claiming they can create new life forms, and own the publishing rights. Austen Heinz’ firm is called Cambrian Genomics which grows genetically-controlled and edited plants. The most amazing example is the creation of a rose species that literally glows in the dark. Cambrian is collaborating with the rose’s designer, a company called Glowing Plant, whose projects were eventually banned from kickstarter for violating a rule about owning lifeforms. Eventually, Heinz wants to let customers request and create creatures: http://www.sfgate.com/business/article/Controversial-DNA-startup-wants-to-let-customers-5992426.php#photo-7342819
The final example in an ongoing list of 2015 breakthroughs involving CRISPR is this CRISPR-mediated direct mutation of cancer genes in the mouse liver might be able to combat cancer. It’s the second cancer-related breakthrough in 2015 that affects the immune system, the first was on Cosmos about a week back: Accidental Discovery Could Turn Cancer Cells Into Cancer-Attacking Immune Cells.

Other Related Cosmoso.net articles:

Pre-Darwinian Theory of Heredity Wasn’t Too Far Off

Wooly Mammoth Poised to be the First De-Extincted Animal, Son~!

 

Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY

The Computer of the Future is…. Vague.


Quantum Computer prototypes make mistakes. It’s in their nature. Can redundancy correct them?

Quantum memory promises speed combined with energy efficiency. If made viable it will be used in phones, laptops and other devices and give us all faster, more trustworthy tech which will require less power to operate.  Before we see it applied, the hardware requires redundant memory cells to check and double-check it’s own errors.

All indications show quantum tech is poised to usher the next round of truly revolutionary devices but first, scientists must solve the problem of the memory cells saving the wrong answer. Quantum physicists must redesign circuitry that exploits quantum behavior. The current memory cell is called a Qubit. The Qubit takes advantage of quantum mechanics to transfer data at an almost instantaneous rate, but the data is sometimes corrupted with errors. The Qubit is vulnerable to errors because it is physically sensitive to small changes in the environment it physically exists in. It’s been difficult to solve this problem because it is a hardware issue, not a software design issue. UC Santa Barbara’s physics professor John Martinis’ lab is dedicated to finding a workaround that can move forward without tackling the actual errors. They are working on a self-correcting Qubit.

The latest design they’ve developed at Martinis’ Lab is quantum circuitry that repeatedly self-checks for errors and suppresses the statistical mistake. Saving data to mutliple Qubits and empowering the overall system with that kind of desirable reliability we’ve come to expect from non-quantum digital computers. Since an error-free Qubit seemed last week to be a difficult hurdle, this new breakthrough seems to mean we are amazingly close to a far-reaching breakthrough.

Julian Kelly is a grad student and co-lead author published in Nature Journal:

“One of the biggest challenges in quantum computing is that qubits are inherently faulty so if you store some information in them, they’ll forget it.”

Bit flipping is the problem dejour in smaller, faster computers.

Last week I wrote about a hardware design problem called bit flipping, where a classic, non-quantum computer has this same problem of unreliable data. In effort to make a smaller DRAM chip, designers created an environment where the field around one bit storage location could be strong enough to actually change the value of the bit storage location next to it. You can read about that design flaw and the hackers who proved it could be exploited to gain system admin privileges in otherwise secure servers, here.

Bit flipping also applies to this issue in quantum computing. Quantum computers don’t just save information in binary(“yes/no”, or “true/false”) positions.  Qubits can be in any or even all positions at once, because they are storing value in multiple dimensions. It’s called “superpositioning,” and it’s the very reason why quantum computers have the kind of computational prowess they do, but ironically this characteristic also makes Qubits prone to bit flipping. Just being around atoms and energy transference is enough to create unstable environments and thus unreliable for data storage.

“It’s hard to process information if it disappears.” ~ Julian Kelly.

Along with Rami Barends, staff scientist Austin Fowler and others in the Martinis Group, Julian Kelly is making a data storage scheme where several qubits work in conjunction to redundantly preserve information. Information is stored across several qubits in a chip that is hard-wired to also check of the odd-man-out error. So, while each Qubit is unreliable, the chip itself can be trusted to store data for longer and with less, hopefully, no errors.

It isn’t a new idea but this is the first time it’s been applied. The device they designed is small, in terms of data storage, but it works as designed. It corrects its own errors. The vision we all have of a working quantum computer able to process a sick amount of data in an impressively short time? That will require something in the neighborhood of  a hundred million Qubits and each of the Qubits will be redundantly  self-checking to prevent errors.

Austin Fowler spoke to Phys.org about the firmware embedded in this new quantum error detection system, calling it surface code. It relies on the measurement of change between a duplication and the original bit, as opposed to simlpy comparing a copy of the same info. This measurement of change instead of comparison of duplicates is called parity recognition, and it is unique to quantum data storage. The original info being preserved in the Qubits is actually unobserved, which is a key aspect of quantum data.

“You can’t measure a quantum state, and expect it to still be quantum,” explained Barends.

As in any discussion of quantum physics, the act of observation has the power to change the value of the bit. In order to truly duplicate the data the way classical computing does in error detection, the bit would have to be examined, which in and of itself would potentially cause a bitflip, corrupting the original bit. The device developed at Martini’s U of C Santa Barbara lab

This project is a groundbreaking way of applying physical and theoretical quantum computing because it is using the phsycial Qubit chip and a logic circuit that applies quantum theory as an algorithm. The results being a viable way of storing data prove that several otherwise untested quantum theories are real and not just logically sound. Ideas in quantum theory that have been pondered for decades are now proven to work in the real world!

What happens next?

Phase flips:

Martinis Lab will be continuing it’s tests in effort to refine and  develop this approach. While the bit flip errors seemed to have been solved with this new design, there is a new type of error not found in classical computing that has yet to be solved: the  phase-flip. Phase-flips might be a whole other article and until Quantum physicists solve them there is no rush for the layman to understand.

Stress tests:

The team is also currently running the error correction cycle for longer and longer periods while monitoring the devices integrity and behavior to see what will happen. Suffice to say, there are a few more types of errors than it may appear, despite this breakthrough.

Corporate sponsorship:

As if there was any doubt about funding…. Google has approached Martinis Lab and offered them support in effort to speed up the day when quantum computers stomp into the mainstream.

Jonathan Howard
Jonathan is a freelance writer living in Brooklyn, NY